Latest news from 5wire Networks

How To Install the Apache Web Server on Ubuntu 18.04

Introduction

In this guide, we’ll explain how to install an Apache web server on your Ubuntu 18.04 server.

The Apache HTTP server is the most widely-used web server in the world. It provides many powerful features including dynamically loadable modules, robust media support, and extensive integration with other popular software.

Prerequisites

Before you begin this guide, you should have a regular, non-root user with sudo privileges configured on your server. Additionally, you will need to enable a basic firewall to block non-essential ports. You can learn how to configure a regular user account and set up a firewall for your server by following our initial server setup guide for Ubuntu 18.04.

When you have an account available, log in as your non-root user to begin.

You are now ready to install an Apache web server on your Ubuntu 18.04 server.

Step 1 — Installing Apache

Apache is available within Ubuntu’s default software repositories, making it possible to install it using conventional package management tools.

Let’s begin by updating the local package index to reflect the latest upstream changes:

$ sudo apt update

Then, install the [apache2] package:

$ sudo apt install apache2

After confirming the installation, [apt] will install Apache and all required dependencies.

Step 2 — Adjusting the Firewall

Before testing Apache, it’s necessary to modify the firewall settings to allow outside access to the default web ports. Assuming that you followed the instructions in the prerequisites, you should have a UFW firewall configured to restrict access to your server.

During installation, Apache registers itself with UFW to provide a few application profiles that can be used to enable or disable access to Apache through the firewall.

List the [ufw] application profiles by typing:

$ sudo ufw app list

You will see a list of the application profiles:

Output
Available applications:
  Apache
  Apache Full
  Apache Secure
  OpenSSH

As you can see, there are three profiles available for Apache:

  • Apache: This profile opens only port 80 (normal, unencrypted web traffic)
  • Apache Full: This profile opens both port 80 (normal, unencrypted web traffic) and port 443 (TLS/SSL encrypted traffic)
  • Apache Secure: This profile opens only port 443 (TLS/SSL encrypted traffic)

It is recommended that you enable the most restrictive profile that will still allow the traffic you’ve configured. Since we haven’t configured SSL for our server yet in this guide, we will only need to allow traffic on port 80:

$ sudo ufw allow 'Apache'

You can verify the change by typing:

$ sudo ufw status

You should see HTTP traffic allowed in the displayed output:

Output
Status: active

To                         Action      From
--                         ------      ----
OpenSSH                    ALLOW       Anywhere                  
Apache                     ALLOW       Anywhere                  
OpenSSH (v6)               ALLOW       Anywhere (v6)             
Apache (v6)                ALLOW       Anywhere (v6)

As you can see, the profile has been activated to allow access to the web server.

Step 3 — Checking your Web Server

At the end of the installation process, Ubuntu 18.04 starts Apache. The web server should already be up and running.

Check with the [systemd] init system to make sure the service is running by typing:

$ sudo systemctl status apache2
Output
● apache2.service - The Apache HTTP Server
   Loaded: loaded (/lib/systemd/system/apache2.service; enabled; vendor preset: enabled)
  Drop-In: /lib/systemd/system/apache2.service.d
           └─apache2-systemd.conf
   Active: active (running) since Tue 2018-04-24 20:14:39 UTC; 9min ago
 Main PID: 2583 (apache2)
    Tasks: 55 (limit: 1153)
   CGroup: /system.slice/apache2.service
           ├─2583 /usr/sbin/apache2 -k start
           ├─2585 /usr/sbin/apache2 -k start
           └─2586 /usr/sbin/apache2 -k start

As you can see from this output, the service appears to have started successfully. However, the best way to test this is to request a page from Apache.

You can access the default Apache landing page to confirm that the software is running properly through your IP address. If you do not know your server’s IP address, you can get it a few different ways from the command line.

Try typing this at your server’s command prompt:

$ hostname -I

You will get back a few addresses separated by spaces. You can try each in your web browser to see if they work.

An alternative is typing this, which should give you your public IP address as seen from another location on the internet:

$ curl -4 icanhazip.com

When you have your server’s IP address, enter it into your browser’s address bar:

http://your_server_ip

You should see the default Ubuntu 18.04 Apache web page:

Apache default page

This page indicates that Apache is working correctly. It also includes some basic information about important Apache files and directory locations.

Step 4 — Managing the Apache Process

Now that you have your web server up and running, let’s go over some basic management commands.

To stop your web server, type:

$ sudo systemctl stop apache2

To start the web server when it is stopped, type:

$ sudo systemctl start apache2

To stop and then start the service again, type:

$ sudo systemctl restart apache2

If you are simply making configuration changes, Apache can often reload without dropping connections. To do this, use this command:

$ sudo systemctl reload apache2

By default, Apache is configured to start automatically when the server boots. If this is not what you want, disable this behavior by typing:

$ sudo systemctl disable apache2

To re-enable the service to start up at boot, type:

$ sudo systemctl enable apache2

Apache should now start automatically when the server boots again.

When using the Apache web server, you can use virtual hosts (similar to server blocks in Nginx) to encapsulate configuration details and host more than one domain from a single server. We will set up a domain called your_domain, but you should replace this with your own domain name.

Apache on Ubuntu 18.04 has one server block enabled by default that is configured to serve documents from the [/var/www/html] directory. While this works well for a single site, it can become unwieldy if you are hosting multiple sites. Instead of modifying [/var/www/html], let’s create a directory structure within [/var/www] for a your_domain site, leaving [/var/www/html] in place as the default directory to be served if a client request doesn’t match any other sites.

Create the directory for your_domain as follows:

$ sudo mkdir /var/www/your_domain

Next, assign ownership of the directory with the [$USER] environment variable:

$ sudo chown -R $USER:$USER /var/www/your_domain

The permissions of your web roots should be correct if you haven’t modified your [unmask] value, but you can make sure by typing:

$ sudo chmod -R 755 /var/www/your_domain

Next, create a sample [index.html] page using [nano] or your favorite editor:

$ nano /var/www/your_domain/index.html

Inside, add the following sample HTML:

                  /var/www/your_domain/index.html
<html>
    <head>
        <title>Welcome to Your_domain!</title>
    </head>
    <body>
        <h1>Success!  The your_domain virtual host is working!</h1>
    </body>
</html>

Save and close the file when you are finished.

In order for Apache to serve this content, it’s necessary to create a virtual host file with the correct directives. Instead of modifying the default configuration file located at [/etc/apache2/sites-available/000-default.conf] directly, let’s make a new one at [/etc/apache2/sites-available/your_domain.conf]:

$ sudo nano /etc/apache2/sites-available/your_domain.conf

Paste in the following configuration block, which is similar to the default, but updated for our new directory and domain name:

           /etc/apache2/sites-available/your_domain.conf
<VirtualHost *:80>
    ServerAdmin webmaster@localhost
    ServerName your_domain
    ServerAlias www.your_domain
    DocumentRoot /var/www/your_domain
    ErrorLog ${APACHE_LOG_DIR}/error.log
    CustomLog ${APACHE_LOG_DIR}/access.log combined
</VirtualHost>

Notice that we’ve updated the [DocumentRoot] to our new directory and [ServerAdmin] to an email that the your_domain site administrator can access. We’ve also added two directives: [ServerName], which establishes the base domain that should match for this virtual host definition, and [ServerAlias], which defines further names that should match as if they were the base name.

Save and close the file when you are finished.

Let’s enable the file with the [a2ensite] tool:

$ sudo a2ensite your_domain.conf

Disable the default site defined in [000-default.conf]:

$ sudo a2dissite 000-default.conf

Next, let’s test for configuration errors:

$ sudo apache2ctl configtest

You should see the following output:

Output
Syntax OK

Restart Apache to implement your changes:

$ sudo systemctl restart apache2

Apache should now be serving your domain name. You can test this by navigating to [http://your_domain], where you should see something like this:

Install Apache Ubuntu 18.04 successful

Step 6 – Getting Familiar with Important Apache Files and Directories

Now that you know how to manage the Apache service itself, you should take a few minutes to familiarize yourself with a few important directories and files.

Content

  • [/var/www/html]: The actual web content, which by default only consists of the default Apache page you saw earlier, is served out of the [/var/www/html] directory. This can be changed by altering Apache configuration files.

Server Configuration

  • [/etc/apache2]: The Apache configuration directory. All of the Apache configuration files reside here.
  • [/etc/apache2/apache2.conf]: The main Apache configuration file. This can be modified to make changes to the Apache global configuration. This file is responsible for loading many of the other files in the configuration directory.
  • [/etc/apache2/ports.conf]: This file specifies the ports that Apache will listen on. By default, Apache listens on port 80 and additionally listens on port 443 when a module providing SSL capabilities is enabled.
  • [/etc/apache2/sites-available/]: The directory where per-site virtual hosts can be stored. Apache will not use the configuration files found in this directory unless they are linked to the [sites-enabled] directory. Typically, all server block configuration is done in this directory, and then enabled by linking to the other directory with the [a2ensite] command.
  • [/etc/apache2/sites-enabled/]: The directory where enabled per-site virtual hosts are stored. Typically, these are created by linking to configuration files found in the [sites-available] directory with the [a2ensite]. Apache reads the configuration files and links found in this directory when it starts or reloads to compile a complete configuration.
  • [/etc/apache2/conf-available/][/etc/apache2/conf-enabled/]: These directories have the same relationship as the [sites-available] and [sites-enabled] directories, but are used to store configuration fragments that do not belong in a virtual host. Files in the [conf-available] directory can be enabled with the [a2enconf] command and disabled with the [a2disconf] command.
  • [/etc/apache2/mods-available/][/etc/apache2/mods-enabled/]: These directories contain the available and enabled modules, respectively. Files in ending in [.load] contain fragments to load specific modules, while files ending in [.conf] contain the configuration for those modules. Modules can be enabled and disabled using the [a2enmod] and [a2dismod] command.

Server Logs

  • [/var/log/apache2/access.log]: By default, every request to your web server is recorded in this log file unless Apache is configured to do otherwise.
  • [/var/log/apache2/error.log]: By default, all errors are recorded in this file. The [LogLevel] directive in the Apache configuration specifies how much detail the error logs will contain.

Conclusion

Now that you know how to install an Apache web server on your Ubuntu 18.04 server, you have many options for the type of content you can serve and the technologies you can use to create a richer experience. See this article to learn about setting up an automatically renewing SSL Certificate for your Apache web server.

This tutorial taught you how to install an Apache web server on your Ubuntu 18.04 server, see this article for the Ubuntu 20.04 tutorial.

break

Original Content by Justin Ellingwood & Kathleen Juell and edited by the author of this post according to the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.